OPTIBAR P 1010

Ultra-compact pressure transmitter for basic pressure and level applications—ideal where space is limited but reliable measurement is essential.

Overview

The OPTIBAR P 1010 is a cost-effective, space-saving pressure transmitter for absolute and gauge pressure measurement of gases and liquids. Designed for simplicity and versatility, it is well suited for monitoring pumps, compressors, and general machinery, as well as hydrostatic level measurement in open tanks or vessels where installation space is restricted.
Its fully welded measuring cell incorporates a corrosion-resistant stainless steel diaphragm, offering ranges from 0.1…600 bar (4…8700 psi). With a modular design that supports a variety of process connections, pressure ranges and electrical configurations, the OPTIBAR P 1010 provides dependable performance in both industrial and environmental applications, and is certified for use in hazardous areas.

Features & Options

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

Outstanding temperature and static pressure stability even under harsh conditions
Unique 3D linearisation of transmitter: compensation for all influencing factors at virtually all possible combinations
Very good repeatability and long-term stability of the measuring signal
Integrated absolute pressure measurement for lowest possible influence of static pressure changes on the signal while providing an additional process signal
Very quick step response times <125 ms
Combined DP, SP and T measurements for maximum process security
Compact measuring cell with low weight
Turndown ratio up to 100:1, higher upon request
Extensive diagnostic and parameterization functions on the display and adjustment module or the user-friendly and free DTMs
Wireless device commissioning, verification and monitoring with the OPTICHECK Pressure Mobile app
Ex ia, Ex d, Ex t approvals
SIL 2/3

Typical Applications

Chemical, petrochemical, power generation, food and beverage, water and other industries
Pressure monitoring of filters and pumps with overload protection of up to 160 bar / 2320 psi
Level measurement of liquids in pressurised vessels
Flow measurement of gases, vapours and liquids with primary elements
Measurement of density and separating layers of liquids in tanks

Specifications

Depending on selected device configuration

General information

Product type

Pressure transmitter

Product family name

OPTIBAR

Product positioning

For basic pressure and level applications

Measurement principle

Hydrostatic

Measured media

Liquids, gases

Measuring point

Open tank

Operating conditions

Process temperature

–40…+125 °C / –40…+257 °F

Materials

Diaphragm

Austenitic stainless steel (1.4435/316L)

Fill fluid

Silicone oil

Measuring cell seal

EPDM, FKM, FFKM, or “without” (fully welded option)

Process connections

Thread connections

Male: G¼, G½ (EN 837-1); G¼, G½ (DIN 3852); G½ (DIN 3852, 10 mm bore); ¼ NPT, ½ NPT

Approvals/Standards

Other approvals

Pressure Equipment Directive (PED)

Explosion protection

ATEX, IECEx

Communication

Analogue outputs

0…10 VDC, 4…20 mA

Related Prodcuts

OPTIBAR PSM 1010

Electronic pressure switch for basic pressure and level applications – compact, reliable and fully configurable for diverse process needs.